Welcome back to the Proje’ blog! This week, we’re going to look at the very end of your detailing process – either after you’ve washed your car and used a DA polisher on it, and are just looking for a final mega-shine, or for when you’ve finished working but then catch a glimpse of a minor defect that you want to get rid of quickly and easily. The main thing is that you don’t want have to go over a larger, more time-consuming process again, when 99% of the car is perfect. So, knowing that this is a regular issue, we put our heads together at Proje’ and came up with Revive Final Polish – the perfect solution for those final touch-ups.
How does Revive work?
Revive Final Polish has been scientifically engineered to produce a dust-free, swirl free, defect free, high gloss finish to any painted surface; clear coat, gel coat and even ceramic coated surfaces. Utilizing the latest micro-abrasive technology, it’s the most effective and efficient way to remove light paint defects or as the last step in your polishing process. We’ve used an advanced technology called micro-abrasion, where micron-sized particles mix with surrounding air and penetrate defects on your paintwork at high velocity, removing them quickly and safely. The combination of this and the no-dust formula ensures that you achieve fantastic results instantly and the clean-up process is as simple as a wipe with a microfiber towel – none of the long and taxing clean-ups that other products might leave you with.
Ok, so how do I use it then?
The whole point of Revive Final Polish is that it’s super quick and easy to use, so you’re not held up by a minor task. Just follow these 5 steps and you’ll end up with fantastic results.
- Add 4 dime-sized dots of Revive Final Polish to your Blue Applicator Pad – you can use a DA polisher on speed 2 if you want, it depends on the size of the defect.at any one time.
- If you’re using your DA polisher, gently apply the machine with the pad and product directly to the surface of your vehicle, making one full pass cross the affected area at speed 2. You don’t need to apply any pressure – this is a light pass across the surface. If you’re using your applicator pad, just remember to work in a circular motion.
- Once you’ve spread Revive evenly across the area, give it a good buffing with your applicator – or crank up your DA Polisher to speed 4 and let it do the work.
- Now, wipe away the product with a clean microfiber towel. You should be able to notice the difference: no oxidation marks, no swirls or stains, and a shinier, smoother surface free from any defects.
Of course, you can always repeat this process if you need, but Revive is designed to catch those last little bits and turn a negative into a positive – all for $25.99. We think this really is an essential addition to your detailing armor!
We hope you’ve enjoyed reading this week’s blog – stay tuned for more tips and tricks next week. We’re going to feature more of our kits each month too, so keep an eye out for more great all-in-one deals and some incredible discounts!
If you have any questions about any of the techniques or products that we’ve mentioned in this post, just add a comment below and we’ll post a reply! Remember that we stock only the best auto detailing supplies, so why not click some of the links in this blog post, or visit our products page to find out more? From all of us at Proje’, Enjoy the Process!