Welcome back to the Proje’ blog! Today, we want to start by asking you the question: What’s the difference between good detailing and great detailing?
The answer is this: The little extras.
Think of a situation where you’ve been working on your bodywork. Let’s say you’ve gone through the initial wash, using our Vital Car Wash Soap as you should. Perhaps you’ve been looking at using a Ceramic product or even a Wax. These things are all gonna’ look great, sure, but if you want to put the final cherry on the top, you should consider using a polish at the end. The alternative, of course, is that you’ve noticed a real minor imperfection and you don’t want to have to redo an entire process – just a little bit of micro work on the affected area would be more convenient. This is where Revive Final Polish comes in.
Restore or Add the Finishing Touch – a Dual Purpose Product
Revive Final Polish has been scientifically engineered to produce a dust-free, swirl free, defect free, high gloss finish to any painted surface; clear coat, gel coat and even ceramic coated surfaces. Utilizing the latest micro-abrasive technology, Revive Final Polish is the most effective and efficient way to remove light paint defects or as the last step in your polishing process. Revive Final Polish is safe on fresh paint and soft clear coats leaving a mark-free finish on all paint colors.
We have an advanced technology called micro-abrasion, where micron-sized particles mix with surrounding air and penetrate defects on your paintwork at high velocity, removing them quickly and safely. The combination of this and the no-dust formula ensures that you achieve fantastic results instantly and the clean-up process is as simple as a wipe with a microfiber towel – none of the long and taxing clean-ups that other products might leave you with.
For the last step in your polishing process, or as a polish for minor paint defects, Revive Final Polish is the answer to all your prayers. It removes minor defects without any fuss but also leaves a long-lasting glossy finish, so you and others really know that you’ve put in the hard work. Think light duty, a focus on the little bits at the end of a detailing process, or a way of quickly maintaining your previous hard work. It’s convenient, it’s quick, and it’s super effective.
Let’s take a look at how to use Revive Final Polish:
You only need to use four dime-sized dots of our polish at once, meaning that you get serious value for your $25.99. Go ahead and squirt them on to a clean microfiber pad, using a DA polisher, set to speed 2. Then, you’re going to start off with a small section – about 2ft x 2ft section. Gently apply the machine with the pad and product directly to the surface of your vehicle, making one full pass with the machine at speed 2. You don’t need to apply any pressure – this is a light pass across the surface. The beauty of using a DA machine is that it does all the hard work, so you don’t have to!
At this stage, it’s time to crank up the power a bit. Increase the machine speed to 4 and make go over the surface again, this time in a cross-hatch pattern to ensure full coverage and workability across the surface. Take your time and remember: you don’t need to press down. Unlike with other levelling products, you won’t get any dust kicking up, so you should start to see results as you work.
After you’ve made 3-4 cross hatch passes, wipe the panel with a clean microfiber towel and inspect the paint. You should be able to notice the difference; no oxidation marks, no swirls or stains, and a shinier, smoother surface.
Now you’ve done the whole job, it’s time to have a look over your handiwork! If there is any part of the surface that you feel needs an extra pass, go right ahead! There’s no danger to your car at all – you’ve got the freedom to be as meticulous as you like.
That’s the beauty of our products – we like to let you choose how serious to get when you use them!
We hope you’ve enjoyed reading this week’s blog – stay tuned for more tips and tricks next week. We’re going to feature more of our kits each month too, so keep an eye out for more great all-in-one deals and some incredible discounts!
If you have any questions about any of the techniques or products that we’ve mentioned in this post, just add a comment below and we’ll post a reply! Remember that we stock only the best auto detailing supplies, so why not click some of the links in this blog post, or visit our products page to find out more? From all of us at Proje’, Enjoy the Process!