Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz

Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz

Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz

Ceramic Enthusiast Pack - Instant Hydrophobic Protection, Brilliant Depth & Shine 16oz

$69.95 $139.95

: Typically ships in 1-2 business days when in stock.

(1) Prep Spray (1) Ceramic Spray Coating (1) SiO2 Quick Coat (2) Applicator Pads (6) Super Soft Microfiber Towels
 

 

 

 

 

 

(1) Ceramic Spray Coating – Instant Hydrophobic Protection, Brilliant Depth & Shine

  • Less Maintenance -  Ceramic coating means you wash your car less!
  • 5 Minute Car Wash - Wash your car in 5 minutes with a ceramic coating
  • Direct Sun Light - For the first time ever, you are able to apply in direct sunlight
  • Anyone Can Do It - Now anyone can install a ceramic coating without being scared of permanent damage!
  • Paint Protection – A ceramic coating means your paint is protected from all elements for up to 12 months
  • Extreme Shine & Depth – Fills in imperfection, leaving you with more clarity and richer depth of color

Ceramic Spray Coating is a premium, real deal product at a consumer level that gives the surface of your vehicle an incredible candy apple shine in just 1-2 minutes. Its ultra-hydrophobic properties not only produce incredible water beading, but also makes your car super easy to clean, saving you time and money in the long run. Stronger and slicker than any other sealant on the auto detailing market today, Ceramic Spray Coating will protect your surfaces from oxidation, pollen, water spots and more. It’s a game changer in the consumer market, and it’s unbelievable easy to use.

Hydrophobic

The secret to an effective coating? Hydrophobic properties. After leaving Ceramic Spray Coating on your vehicle surface for 1-2 minutes, it will have fully cured and you can wipe away knowing that you’re protected. The winning formula within our coating gives your car’s surface major hydrophobia – but that’s a good thing. Think that incredible music video shine, and those incredible circular beads that fall off your paintwork in super slow-mo. Well, it’s all attainable in just a few minutes with Ceramic Spray Coating!

Incredible Color

Not only does Ceramic Spray Coating protect, but it also restores color to imperfect areas of your bodywork. Minor scratches, fading, slight imperfections – all gone and restored to good as new, with just a few sprays.

Long Lasting Protection

SiO2 forms an extremely effective layer of protection from the elements, and our Ceramic Spray Coating is the best SiO2 spray out there. UVA and UVB rays won’t penetrate it, pollen can’t touch it, and dirt and dust just fall away like water. One application will last for up to 12 months, guaranteeing you insane value for money!

How to Use Ceramic Spray Coating

Step 1: Thoroughly wash and dry the surface before use; for even better results, clay the surface first to remove any contaminants ( For best results )

Step 2: Use a DA polisher to remove swirls, scratches and other imperfections where necessary. ( For best results )

Step 3: Prep the surface with a surface prep spray we recommend Proje’s Prep Spray to remove any lingering residue.

Step 4: Spray Ceramic Spray Coating directly on to a clean microfiber towel or one of our blue applicator pads. Apply evenly and ensure complete coverage of the area you are treating.

Step 5: While you can remove the Ceramic Spray Coating after as little as 25 seconds, we recommend that you leave it for 1 to 2 minutes. You can also repeat the process for added layers.

Step 6: Keep the surface dry and away from the elements where possible, for up to 2-3 hours after application. Don’t worry – you’re not in any danger; you’re just giving the coating every chance to do the best possible job. ( For best results. You can do your water test in as little as 20 minutes )

For best results, reapply a coat once a month as a top-up. It’s that simple! 

(1) Prep Spray – Prepare your Paintwork for a Quality Protective Coat

  • Revealing – Removes old polish to reveal imperfections and scratches
  • Lubricating – Natural lubrication ensures that no new scratches are introduced 
  • Preparing – Removes old wax and sealant in preparation for a brand-new protective coat

Start from Zero

Our Prep Spray helps you to put on a pristine, uniform protective coat by removing all old polish, wax and sealant from the surface of your car. Often, these spent leftovers can clog up the pores of your surface, which reduces the effectiveness of a new ceramic coat. In addition, small amounts of old polish or sealant can hide imperfections in your paintwork, such as small scratches or swirls which need addressing in order to get the maximum amount of protection. Proje’ Prep Spray ensures that everything is removed, so you can start again from zero.

Protect as you Go

The natural lubricating agent inside Prep Spray ensures that you aren’t running the risk of introducing new scratches or defects as you remove old residue from your paintwork. This means that you can work more effectively and put a bit more effort in without any concerns that you might damage your paintwork. 

Prepare for Perfection

Having a completely stripped surface before applying a new ceramic coating is the best way to ensure long-lasting results. By using Prep Spray, you can then buff out any imperfections before adding a ceramic coat, meaning you’re left with perfection and a layer of protection that lasts up to a year.

How to use Prep Spray

Using Proje’ Prep Spray is quick and simple. 

1) Make sure you’re working on a clean, dry surface by washing your paintwork first with Vital Car Wash Soap.

2) Prep Spray can be applied directly to the surface of your vehicle. Simply spray, wait 30 seconds to a minute, then wipe away with a clean microfiber cloth. Don’t worry about applying too much pressure; the natural lubricant within Prep Spray ensures that there is no harmful friction.

3) Repeat until the entire area has been sprayed. Now, you’re ready to apply your ceramic coat. Check out our Ceramic Spray Coating here.

(1) SiO2 Quick Coat – Ceramic Waterless Wash, Shine & Protect

  • 5-in-1 – Cleans, levels imperfections, adds depth, shines and protects all in one, saving you time and money
  • Easy To Use – Waterless wash means no water, no buckets, no hassle
  • Best Value – Best value in the industry for 16oz!

The SiO2 Quick Coat blend is a special proprietary blend that cuts through dirt, grease and grime, and leaves you with a layer of SiO2 to seal and protect your surface. Not only does it protect you will instantly see an incredible shine that will have anyone raising an eye brow. Not only is this a 5-in-1 product, but it is also safe on all surfaces. Use it on your paintwork, chrome, plastics, rubbers for all-over protection. Now, that’s value!

Waterless Wash

By adding cleaning agents to our special blend, after spraying the formula directly onto your dirty cars paint, dirt will instantly begin to dissolve and become incapsulated. Gravity does its work and you will start to see the encapsulated particles begin to effortlessly glide across the paints surface. Once this is happening, you are safe to wipe the product away using a clean microfiber towel. And you are left with a scratch-free surface!

Level Imperfections

SiO2 nano-particles fill in light scratches after your first spray and wipe! Give the SiO2 particles a few seconds to seat into the light scratches, and then buff the surface to a leveled and filled shine! You can really see the difference!

Adds Depth

By leveling and filling in light scratches you will naturally be able to see more INTO the paint! This gives it more dimension, and using patented proprietary additives, the deepness of your paints color will become more rich and lustrous.

Show Room Shine

SiO2 (Silicon Dioxide) is quite literally nano-glass particles. This is why you will be left with a "glass-like" shine when you have buffed away the high spots!

Protection

SiO2 creates a stronger bond than wax. Silicon Dioxide has a much more simple molecular structure which means the bonds are more tightly woven together. Wax has a more complex molecular structure, which provides for more breaks in the bonds. With SiO2, you are left with strong protection you can rely on.

A Safe Blend

Lots of second-rate products out there are too heavy on the chemicals and can harm the surface of your paint. This makes them harder to use, as you have to be careful about residual contact while you’re working. Our SiO2 Quick Coat is pH neutral and completely safe for use on all surfaces. This means you can spray away without any worries. Doesn't stain plastics, rubbers or other miscellaneous surfaces!

Protect the Environment

Cleaning and protecting your car is certainly becoming more environmentally-friendly, but we’re helping this process move along a bit quicker with this waterless wash. You don’t need a hose, you don’t need two buckets full of water. All you need is our SiO2 Quick Coat and two microfiber towels. It’s that simple!

Immediate Protection

If you’re using a home setup to do your detailing, then there can often be a fair amount of time in between your cleaning, shining and sealing processes. In a non-professional environment, this can mean that there are a few contaminants that always work their way back on to your vehicle during the changeover. While this isn’t going to cause massive problems if you keep on top of your detailing, it isn’t going to deliver perfection.

An important advantage of a 5-in-1 product like SiO2 Quick Coat, is that it does all five of these processes simultaneously. As it cleans, it levels, adds depth, shines and protects. There is no time in between for any dust or dirt to come into contact with your surfaces. That’s what you call efficiency – another reason SiO2 Quick Coat is the best ceramic waterless wash on the market today.

How to Use

Using our SiO2 Quick Coat couldn’t be easier. All you need to do is spray directly on to the surface you are working on, give the cleaning agents a moment to encapsulate the dirt, and then with a clean microfiber towel, wipe away. This is your cleaning phase.

Next what you will be left with is the SiO2 coat left on the surface. Give the SiO2 a moment to level imperfections. After a few seconds, take your second clean microfiber towel and buff away the high spots. You will then be left with leveled imperfections, added depth, and ultra-shine created from SiO2 nano-glass particles, and protection from the elements! You will find it works quickly and easily - no smears, no smudges, no stains, just a perfect clean, protected shine!

Work over a small area of the vehicle at a time. Repeat the process until the desired surface has been completely coated. Now, take a break and bask in the glory of that shine!

(6) Super Soft Edgeless Tagless Microfiber Towels 

Rated at a premium 480 GSM, making it the softest towel that Proje' offers. Ideal for wax and sealant residue removal, waterless washing and even traditional drying methods. The high GSM rating ensures that you will never introduce swirls or scratches to the paintwork when used correctly.

Available in 3-Pack Bundles.

(2) Microfiber Applicator Pads

The Microfiber Applicator Pad works great for general cleaning, applying coatings, conditioners, waxes, sealants, glazes, dressings and more. It has been specifically designed to fit perfectly in your hand and ensures that you will never introduce swirls or scratches to paintwork or interior surfaces when used correctly. Better yet, the Blue Applicator Pad is 100% machine washable.

There are a few different designs of applicator pad out there, but our blue applicator pad is by the most flexible around. Solid and easy to grip, it provides a great platform for applying either Carnauba wax or quick wax, as well as leather conditioners and sealant. The design of our pad is extremely uniform, meaning that you get an even application every time. This is often the most time-consuming aspect of applying waxes, as an uneven application can affect smoothness. A number of applicators on the market contains uneven or shaped surfaces, which negatively affect the evenness of application. Our applicator is not only uniform, but it’s the same on both sides, so it’s impossible to get it wrong by accident!

Effective Use – Microfiber Applicator Pad

  1. Pay attention to the steps in our processes so that surfaces are washed and prepared as applicable.
  2. You don’t need large amounts of conditioner or sealant on your pad, just 4 or 5 dots. For wax, you can rub the applicator directly in to the pot to get an even covering. The softness of the applicator will help to set the wax evenly across the surface.
  3. Using straight, uniform lines, spread the application across the chosen surface. Ensure that you are working in the same direction, or in a smooth circular motion in small sections if you are waxing.
  4. Make sure you apply a thin, even coat. You’ll be surprised how a little goes a long way when using our blue applicator pad!
  5. Clean and dry the pad after use, and keep dry in between uses.

The best thing about our applicator pad has to be that it’s so versatile, so take good care of it, and it will take good care of you. One purchase will keep you going for ages, and encompass multiple detailing tasks both inside and outside your car. This really is a product to cherish!

 

This kit gives you everything you need to prep, coat, and maintain your car's paint better than any other system